1.2(7) Win8/64 - Crash after disconnecting a USB controller
Posted: 16 Jan 2014, 14:35
Upgraded to 1.2(7) and was playing around with a NI Kore 2 controller, trying to get it to learn.
Decided to pull the usb plug on the Kore 2 and it disappeared from the list, but then many devices disappeared and all routings were lost. Then the Manager just crashed.
Tried a reboot but about 20 ports were still missing and all routing was lost. Snapshot is of no use, as it cant see the devices which are present in Device Manager.
Copper Lan Virtual Midi Driver was present and service was running.
Lan port is not present in settings and none are available.
Re-installed and it just gets worse now...everything is present in Overview, but one of my midi hubs had been doubled up , because it believed there's is a controller hanging off each port?
The CP-Midi and Midi-CP functionality had completely gone.
Connect and Edit only show 1 midi hub
warnings.log mentions trashcan issues from time to time
-----------------------------------------------------------------------------------------------------------
deleted registry, Uninstalled (7) , removed folders from roaming profile and re-installed (6)
Could not re-use saved snapshot file...I guess ID;s are now different
Everything looks normal except for Overview which has doubled up on every entry (except vmidi) because it must believe a controller is hanging off every port!!
Lan port is present.
Maybe you should pull (7) and do some more testing?
Cheers
Decided to pull the usb plug on the Kore 2 and it disappeared from the list, but then many devices disappeared and all routings were lost. Then the Manager just crashed.
Tried a reboot but about 20 ports were still missing and all routing was lost. Snapshot is of no use, as it cant see the devices which are present in Device Manager.
Copper Lan Virtual Midi Driver was present and service was running.
Lan port is not present in settings and none are available.
Re-installed and it just gets worse now...everything is present in Overview, but one of my midi hubs had been doubled up , because it believed there's is a controller hanging off each port?
The CP-Midi and Midi-CP functionality had completely gone.
Connect and Edit only show 1 midi hub
warnings.log mentions trashcan issues from time to time
-----------------------------------------------------------------------------------------------------------
deleted registry, Uninstalled (7) , removed folders from roaming profile and re-installed (6)
Could not re-use saved snapshot file...I guess ID;s are now different
Everything looks normal except for Overview which has doubled up on every entry (except vmidi) because it must believe a controller is hanging off every port!!
Lan port is present.
Maybe you should pull (7) and do some more testing?
Cheers