Hi,
I'm a new user of CopperLan, and i've got troubles to find a great set up for my rig.
I'm a guitarist and that's my current rig:
Guitar, with Fishmann Tripleplay ( a midi pickup), the Fishman software runs as a plugin in Live.
Instruments are loaded inside the Fishman Soft, wich is loaded several times in several Live Tracks.
I use a KeithMillen Softstep to controll ableton.
I found a Live Midi Remote Script which allows some really cool parameters to configure an efficient looper using Live Session View. There's an "Arm Selected Pist" command !! Something a lot of people always ask for !
Well..
In order to configure that script, I have to send specific Midi Data (Note On mostly) to live.
The script creator gives a list of exact values for each fonction.
I also use the Live Shortkeys Mapper to launch some things.
To do that, I set my SoftStep as a Simple FootOn = 127, then footoff = 0.
I use Bomes'Midi Translator to convert each keys to each CC/Note On value I need, or to KeyShortcut.
SoftStep use midi port SSCOM to send out midi data to MidiTranslator --> Midi Translator ..translates to my own values or keys -> then send to Vmidi 1 out.
In live the Controller Surface is set to my script, with the assiocated port Vmidi1 Input.
I've tried just like this, and it didn't seem to work..
Then I created patch cables, from Vmidi1 to Vmidi1 (guess it's Out to In in Copperlan)..
Then I've created other patch cables, like 1 to 2, and set Vmidi2 out in Live.. And so on..
Etc..
Actually, it worked a certain time, I just can't find the good configuration again, and it's driving me crazy.
I've also tried using LoopBe, a simple 1 in/1 out virtual midi port, and it worked fine by just setting MidiTranslator Out to LoopBe Out and Live Script Controller In to LoopBe In..
Any ideas ?
Thank's a lot.
Logan