Where can I find a version 1.0 download for CopperLan Manage

Where can I find a version 1.0 download for CopperLan Manage

Postby craecrae » 21 Feb 2016, 19:39

Alyseum are asking for a firmware upgrade for my 88 - but it requires version 1.0 of CopperLan to perform the upgrade - the box will not currently work without the firmware upgrade and I can't find version 1.0 to perform the upgrade!!! (Painful)
craecrae
 
Posts: 4
Joined: 21 Feb 2016, 19:24

Re: Where can I find a version 1.0 download for CopperLan Ma

Postby CopperPhil » 21 Feb 2016, 21:07

Wow... the CopperLan 1.0 is a very old version. Not sure that it is working with actual operating system versions, especially on Mac which imposed some low-level changes as new version came out...

I can give you a link to the 1.1(1) version, but without guarantee:

Mac: https://dl.dropboxusercontent.com/u/215 ... %29%5D.dmg
PC: https://dl.dropboxusercontent.com/u/215 ... %29%5D.exe
CopperPhil
 
Posts: 471
Joined: 30 Mar 2011, 15:02
Location: Brussels

Re: Where can I find a version 1.0 download for CopperLan Ma

Postby craecrae » 21 Feb 2016, 21:30

Unfortunately the instructions are quite explicit - and they say this is a "Mandatory" update :roll:

(see attached)
Attachments
Capture.PNG
From Mandatory instructions
craecrae
 
Posts: 4
Joined: 21 Feb 2016, 19:24

Re: Where can I find a version 1.0 download for CopperLan Ma

Postby CopperPhil » 21 Feb 2016, 21:56

Yes, but this is a very old update procedure... is it possible that you still have today a device running one of the first version of the firmware, never been updated? If so it is a very old device, because as far I know all the Alyseum devices produced after Nov 2012 can be updated automatically by the CopperLan Manager.

The firmware upgrader software must be running alone on the network, with no CopperLan Manager running elsewhere. Did you try to start it anyway?
CopperPhil
 
Posts: 471
Joined: 30 Mar 2011, 15:02
Location: Brussels

Re: Where can I find a version 1.0 download for CopperLan Ma

Postby craecrae » 21 Feb 2016, 22:25

............ very strange - the Updater shows as being connected to the AL-88 in the Overview tab of CopperLan Manager but the Alyseum Updater window detects no devices!
Attachments
Capture.PNG
craecrae
 
Posts: 4
Joined: 21 Feb 2016, 19:24

Re: Where can I find a version 1.0 download for CopperLan Ma

Postby CopperPhil » 21 Feb 2016, 22:30

The firmware upgrader software must be running alone on the network, with no CopperLan Manager running elsewhere.


There is a reason: the firmware upgrade tool and the CopperLan Manager are sharing the same exclusive resource (which is a CopperLan sub-protocol not related to the connections you can monitor in the CopperLan Manager). You MUST shut down the CopperLan Manager, AND THEN launch the firmware upgrader to make it able to see the device.
CopperPhil
 
Posts: 471
Joined: 30 Mar 2011, 15:02
Location: Brussels

Re: Where can I find a version 1.0 download for CopperLan Ma

Postby craecrae » 21 Feb 2016, 22:43

.........got it!

That did the trick :)

Thanks for all your help.......... ;)
craecrae
 
Posts: 4
Joined: 21 Feb 2016, 19:24


Return to General

cron