CopperLan

i'm having problems to save my setup with Al88cs properly ... when i power down my studio all settings i made are gone

i didn't had any issue when i had only 1 Al88c or with the previous build of Copperlan (hard to tell what's causing it)

what i' doing to save the setup :
1.go on the Edit page to each Al88c and Save Settings for Midi-In Destinations
2.make a snapshot

this works sometime .. but not always - any tips for making sure everything is saved?
A workflow improvement for a possible Copperlan Update would be very welcome .. talking about it:
is there anything for the nearer future still planned?

guess not!

Win 7 64bit

1/ Configure AL88<-->MIDI routing
2/ Snapshot
3/ Restart CPVNM

All MIDI -->AL88 routing is lost
All MIDI -->MIDI routing is lost

AL88 -->MIDI routing is intact (from the AL88 memory I presume)

Recall snapshot

No difference

MIDI -->ALL routing memory seems broken in latest release

I dont think it's the snapshot function by itself that is duffed, it seems to be the very ability to retain MIDI settings across service re-starts.

Summary: MIDI routing needs to be configured for every session as there is no recall across session.

this is not good.

Yep, went back to 1.4.3.

Snapshots work, but I have to use them on every boot..because the manager doesn't remember the last session.

Hi,

I'm investigating a similar issue for another user.

Can you please run this reporting tool and copy-paste the results hereafter?

For Mac: https://dl.dropboxusercontent.com/u/215 ... ol.app.zip
For PC: https://dl.dropboxusercontent.com/u/215 ... ngTool.exe

Thanks,

/Phil

the tool just crashes on my MBP 2016 OS X 10.12.6